Reinforcement bracket(20mm) - List of Manufacturers, Suppliers, Companies and Products

Reinforcement bracket Product List

1～7 item / All 7 items

Displayed results
Reinforcement hardware for wooden houses [Strong wind and earthquake measures]

Reinforcement hardware for wooden houses [Strong wind and earthquake measures]

It is a fitting for existing buildings. It is also suitable for areas without firebracing foundations or anchor bolts. It can be used for reinforcement with nails or mortise and tenon joints.

The "Build Arm Series" that we handle can be installed on existing buildings and is a reinforcement hardware for wooden houses that allows for wind and earthquake countermeasures at a low cost. Some products in our lineup feature a surface treatment with zinc plating that is resistant to moisture and rust. Currently, we are distributing materials that include data on compression and tensile tests for each product. You can view them immediately via "PDF Download." 【Features of Listed Products】 ■ L-shaped Metal AZ/CZ/II EZ - Contributes to preventing the columns from falling out due to twisting phenomena in the floor. ■ Foundation Metal BZ - Prevents the foundation from lifting or shifting due to earthquakes, etc. ■ Tsuba Metal TP/Foundation Metal DP - Prevents damage to joints caused by vertical and horizontal shaking due to strong winds and earthquakes. ■ Ease Guard NS-21 - Integrates the foundation, base, and columns from the exterior of the building to prevent joint disengagement.

  • Reinforcement and repair materials
  • Foundation construction
  • Residential foundations

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wooden House Reinforcement Fitting "L-Type Metal AZ"

Wooden House Reinforcement Fitting "L-Type Metal AZ"

Introduction of reinforcement brackets used for the application of wooden house reinforcement systems!

Kankyo Shizai Co., Ltd. sells equipment, materials, and chemicals for creating a comfortable environment. The "L-shaped Metal AZ" is a fitting used for reinforcing wooden houses. Its dimensions are 350×350×50mm, t=6. 【Specifications】 ■ Dimensions: 350×350×50mm, t=6 ■ Packaging: 6 sets/case ■ Weight: 20.7kg/case *For more details, please refer to the PDF document or feel free to contact us.

  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wooden house reinforcement hardware "Ease Guide NS-21"

Wooden house reinforcement hardware "Ease Guide NS-21"

Introduction of reinforcement brackets used for the application of wooden house reinforcement systems!

Kankyo Shizai Co., Ltd. sells equipment, materials, and chemicals for creating a comfortable environment. The "Ease Guide NS-21" is a fitting used for reinforcing wooden houses. It has three external mounting points and a height of 730mm. 【Specifications】 ■ Dimensions: 730×180×120mm, t=5 ■ Packaging: 2 sets per case ■ Weight: 13.5kg per case *For more details, please refer to the PDF document or feel free to contact us.

  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 12

Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 12

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. The maximum protrusion of the angle support on the site side is kept to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, since tightening work can be done by one worker from the site side, it enables a reduction in construction time. The FIT Power Type 12 is compatible with block walls of H1,200mm from the road surface. *We have models available for block walls ranging from H1,200 to H1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF document or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement hardware "FIT Power" Type 14 for concrete block walls, etc.

Seismic reinforcement hardware "FIT Power" Type 14 for concrete block walls, etc.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as a substitute for retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. The FIT Power Type 14 is compatible with block walls of H1, 400mm from the road surface. *We also have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement hardware "FIT Power" Type 16 for concrete block walls, etc.

Seismic reinforcement hardware "FIT Power" Type 16 for concrete block walls, etc.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as an alternative to retaining walls. It limits the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, since tightening work can be done by one worker from the site side, it enables a reduction in construction time. The FIT Power Type 16 is compatible with block walls of H1, 600mm from the road surface. *We also have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement hardware "FIT Power" Type 18 for concrete block walls, etc.

Seismic reinforcement hardware "FIT Power" Type 18 for concrete block walls, etc.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve earthquake resistance in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by one worker from the site side, enabling a reduction in construction time. The FIT Power Type 18 is compatible with block walls of H1, 800mm from the road surface. *We have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patented as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF document or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Reinforcement bracket

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.